甲基丙烯醛氧化酯化制甲基丙烯酸甲酯

制备了用于甲基丙烯醛(MAL)一步氧化酯化为甲基丙烯酸甲酯(MMA)的新型催化剂;考察了反应温度、催化剂在反应体系中的质量分数对MAL转化率和产物选择性的影响;将离子液体[bmim]PF6用于该反应中,不仅提高了产物的选择性,还能有效防止产物的聚合。反应温度θ=50℃,催化剂在反应体系中质量分数为2 4%,pH=10 5,O2流量6mL/min,反应时间6h时,在反应体系中添加1mL离子液体[bmim]PF6,MAL的转化率为96 2%,MMA单体的选择性可达98 7%。     

SEM study of the morphologic change of high‐density polyethylene surface grafted with glycidyl methacrylate

Scanning electron microscopy (SEM) study of the morphologic change of high‐density polyethylene (HDPE) surface grafted with glycidyl methacrylate (GMA) was reported. Radiation‐induced grafting of GMA onto HDPE was carried out in acetone and dichloromethane solution, respectively. The effects of irradiation dose, atmosphere, and swelling time on grafting were investigated. Generally, the extent of grafting increased with irradiation dose, but for the grafting carried out in acetone solution, the extent of grafting initially increased with irradiation dose and then remained almost constant. The extent of grafting was higher in acetone solution than in dichloromethane solution at the same irradiation dose. The extent of grafting in nitrogen was higher than that in air. The successful grafting of GMA onto HDPE was confirmed by weighing and FTIR analysis. SEM investigations showed that the morphologies of the PE samples grafted in acetone solution were quite different to those grafted in dichloromethane. The grafting of GMA carried out in acetone was mainly on HDPE surface and that carried out in dichloromethane was mainly in the bulk of HDPE. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Compatibility and thermal properties of poly(acrylonitrile–butadiene–styrene) copolymer blends with poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile)

The mechanical and heat‐resistant properties of acrylonitrile–butadiene–styrene (ABS) binary and ternary blends were investigated. The relationship of compatibility and properties was discussed. The results show that poly(methyl methacrylate) (PMMA) and styrene–maleic anhydride (SMA) can improve the thermal properties of conventional ABS. The Izod impact property of ABS/PMMA blends increases significantly with the addition of PMMA, whereas that of ABS/SMA blends decreases significantly with the addition of SMA. Blends mixed with high‐viscosity PMMA are characterized by higher heat‐distortion temperature (HDT), and their heat resistance is similar to that of blends mixed with SMA. For high‐viscosity PMMA, from 10 to 20%, it is clear that blends appear at the brittle–ductile transition, which is related to the compatibility of the two phases. TEM micrographs show low‐content and high‐viscosity PMMA in large, abnormally shaped forms in the matrix. Compatibility between PMMA and ABS is dependent on both the amount and the viscosity of PMMA. When the amount of high‐viscosity PMMA varied from 10 to 20 wt %, the morphology of the ABS binary blends varied from poor to satisfactory compatibility. As the viscosity of PMMA decreases, the critical amount of PMMA needed for the compatibility of the two phases also decreases. SMA, as a compatibilizer, improved the interfacial adhesiveness of ABS and PMMA, which results in PMMA having good dispersion in the matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2652–2660, 2002     

氢化松香与甲基丙烯酸β-羟乙酯酯化物的制备

用一步法制备了氢化松香与甲基丙烯酸β-羟乙酯(HEMA)酯化物,结果表明,以对苯二酚为阻聚剂,氧化锌为催化剂,用量为氢化松香的1%,反应温度240℃,氢化松香与HEMA的摩尔比为1∶1.2,温度升至200℃时逐滴滴加HEMA,反应时间3h后酯化率可以达到92%以上。红外光谱表明成功制得了氢化松香与HEMA的酯化物,热重分析表明酯化物热稳定性得到了提高。     

原位聚合法制备高透光率韧性PMMA复合树脂的研究

采用原位聚合法制备PMMA/P(BA-St)/PMMA三层韧性有机玻璃复合树脂,分子设计方法的使用,保持了材料的透明性。考察了韧性粒子粒径、橡胶相组成以及橡胶含量对材料力学和光学性能的影响。借助透射电镜、扫描电镜和动态光散射方法对复合胶乳粒子以及所制材料的形态结构进行了表征。结果表明:橡胶相的折光指数对材料的透光率有明显影响,橡胶相玻璃化温度越低,越有利于增韧。     

The time dependent strain potential function for a polymeric glass

Torsion and normal force measurements were made during single step stress relaxation experiments on a polymeric glass (PMMA). Isochronal data were analysed using an approach adapted from that developed by Penn and Kearsley¹ (for incompressible elastic materials) to determine the derivatives $\text{?W}\text{?I}{}_1$, and $\text{?W}\text{?I}{}_2$ of the time dependent strain potential function. $\text{?W}\text{?I}{}_1$ and $\text{?W}\text{?I}{}_2$ are determined from existing solution to the torsion of an incompressible cylinder. A special solution to the torsion of a compressible cylinder is presented and it is shown that the values of $\text{?W}\text{?I}{}_1$ and $\text{?W}\text{?I}{}_2$ obtained using this solution to analyse the data do not differ greatly from those obtained using the incompressible solution. It is found from both solutions that $\text{?W}\text{?I}{}_1$ is negative and increases towards zero with increasing time and deformation while $\text{?W}\text{?I}{}_2$ is positive, greater in magnitude than $\text{?W}\text{?I}{}_1$ and decreases towards zero with increasing time and deformation. These results were unexpected and a full understanding of their meaning has yet to be reached.     

Comparing emulsion polymerization of methacrylate-monomers with different hydrophilicity

A comprehensive experimental study concerning the influence of various types of initiator-emulsifier systems on emulsion polymerization of methacrylate monomers (2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA) and butyl methacrylate (BMA)) reveals interesting relations between initiator and surfactant hydrophilicity on the one hand and the hydrophilicity of the monomers on the other hand. For the water-soluble HEMA stable latexes are only obtained if hydrophobic initiators such as 2,2′-azobisisobutyronitrile or dibenzoyl peroxide in combination with alkyl sulfate surfactants with carbon chain lengths greater than 10 or surface active initiators of the 2,2′-azobis(N-2′-methylpropanoyl-2-amino-alkyl-1)-sulfonate type with alkyl chain lengths greater than 8 are employed. Stable nano size range poly(2-hydroxyethyl methacrylate) (PHEMA) particles have been prepared also by batch emulsion polymerization using ionic surface active initiators (inisurfs). The results clearly show that the formation of stable latex particles requires a proper choice of the initiator-emulsifier system regarding its hydrophilic-hydrophobic balance. The PHEMA particles prepared with surface-active initiators keep their identity and spherical shape even in the dried state whereas in the case of the other initiator-emulsifier systems complete coagulation and coalescence occurs during drying.     

Poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate) as a mouse embryonic stem cells support

A series of swellable ethylene dimethacrylate‐crosslinked poly(2‐hydroxyethyl methacrylate) (PHEMA) sheets of homogeneous (nonporous) structure or with different degrees of swelling and porosities was produced by bulk polymerization in either the absence or the presence of various diluents (porogens). Calculations performed by use of the solubility parameter δ of the reaction components indicate that the solvation conditions of the polymerization system change, depending on the solvating power of the diluent, which thus controls the porosity. Pore volume also seemed to be sensitive to the presence of the linear polymer diluent. Polystyrene (PS) showed, compared with poly(methyl methacrylate) (PMMA), a higher precipitating ability to form porous PHEMA sheets with an increased pore size because of its higher noncompatibility with newly formed crosslinked PHEMA. Given that PHEMA hydrogel is well known for its biocompatibility, it was used here as a potential carrier of cells in transplantation therapies. Attachment and growth of mouse embryonic stem (ES) cells on gelatin‐coated transparent PHEMA hydrogel substrates were examined. Two days after plating, survival and morphology of ES cells were largely similar on both PHEMA hydrogel sheets and in petri dishes as controls. This suggests that PHEMA hydrogels are likely candidates for application in transplantation therapies involving ES cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 425–432, 2003     

Preparation of micron‐size monodispersed PS/P(St/MAA) microspheres by seeded dispersion polymerization

Uniform polystyrene (PSt) particles with the size of 1.9 μm were first prepared via dispersion polymerization, and then used as the seeds in a second‐stage dispersion copolymerization of styrene (St) and methacrylic acid (MAA) to produce carboxyl‐carrying microspheres. The PSt seed particles were swollen by monomer mixture of St and MAA, including an oil‐soluble initiator 2,2′‐azobisiso‐butyronitrile (AIBN), before polymerization. Finally, uniform PS/P(St/MAA) (polydispersity index, PDI = 1.02) microspheres with the size of 2.2 μm were obtained. The average particle size and size distribution of the final microspheres were investigated. MAA contents between 54 and 97 mg/g were detected from the PS/P(St/MAA) particles produced under different conditions. Dispersion medium has great influence on the kinetics of polymerization, due to its effect on the partitioning of monomers, solvents, and initiator in the particle phase, probably as well as on the conformation of the dispersion agent on the surface of the particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3586–3591, 2006     

甲基丙烯酸缩水甘油酯对大豆蛋白塑料改性作用研究

用模压的方法制备了甲基丙烯酸缩水甘油酯(GMA)改性大豆分离蛋白质(SPI)塑料。表征了GMA改性SPI塑料的力学性能、耐水性,并分析了GMA与SPI之间的相互作用。结果表明GMA在模压过程中,环氧基与蛋白质分子间发生接枝和交联反应,同时自聚,在GMA含量较低时可以同时对SPI塑料起到增强和增塑作用,但是随着GMA含量增加,交联作用增强,塑料的断裂伸长率下降。